High Stability Customer Customization Walk In Test Chamber Medicine Testing Machine
The Walk in test chamber is suitable for large size or a large number of machine products, parts, materials for high temperature, low temperature, high low temperature cycle test, and humid heat test. It is mainly used to simulate the product under the combined conditions of climate temperature and humidity or under the changing conditions of ambient temperature and humidity to detect whether the adaptation ability and characteristics of the product change.
The walk in test chamber can be used for the heat dissipation test sample and non-heat dissipation test sample test. For the test of heat dissipation test sample, the heat dissipation power can not exceed the cooling capacity of the refrigeration system of the test box, because the control of temperature and humidity is a dynamic balance process, in different temperature and humidity points, the cooling capacity of the refrigeration system is also accompanied by changes.
Specifications:
| Temp Test - Temp.Range:-70℃～＋150℃
- Temp Fluctuation:±0.5℃～±2.0℃
- Temperature Uniformity:±0.1℃～±2.0℃
- Temp Deviation :±0.1℃～±0.5℃
- Temp Gradient:＜2.0℃
- Heat up time:＜80min
- Cool time:＜100min
| Temp Humidity Test - Temp.Range:＋10℃～＋95℃
- Humidity Range:10%RH～98%RH
- Temp. Uniformity:±0.5℃～±2.0℃
- Humidity Uniformity:±1.0%RH～±5.0%RH
- Temp. Deviation:±0.1℃～±2.0℃
- Humidity Deviation:±1.0%RH～±5.0%RH
- Temp. Fluctuation:±0.1℃～±0.5℃
- Humidity Fluctuation:±1.0%RH～±3.0%RH
- Temp Gradient:＜2.0℃
- Humidity Gradient＜5.0%RH
|
Load Thermal Capacity Chart:
Apply to standard temperature test, the thermal capacity for loading varies from different temperature value.
Temperature and Humidity Control Chart:
Apply to Temp.&. Humid test, the load thermal should not more than 150W
Test Standard:
- GB/T 2423.1 Low Temp. Test
- GB/T 2423.2 High Temp. Test
- GB/T2423.34 Climate Cycling Test
- IEC60068-2 Climate Test
| - GJB 150.3 High Temp. Test
- GJB 150.4 Low Temp. Test
- GJB 150.9 Climate Test
- MIL-STD-202G-103BHumidity Test
|
Structure Mode:
Unitary.Test room is on the top, refrigerator is in the bottom; Power distribution control in the back; Main control panel in the front door, and the extended one is on the right-back side. Door opens from right to left. Air circulation channel and air conditioning system are at the back of test space:(centrifugal fan blade,air flow guiding device,heater,humidifier,Refrigeration heat exchanger,Temp and humidity sensing device.
Composition:
Exterior material: Both sides static coated cold rolled steel
Interior material: SUS304 Stainless steel
Insulation material: Rigid polyurethane foam insulation layer
Product Tags:
|
|
GB/T 2423. High-Volume Walk-in Temperature Humidity Chamber for Product Testing Images
|
